Wavetek MS1300 Dokumentacja Pobierz pdf (Strona 80)

2-38

THE PASS/FAIL INDICATORTHE PASS/FAIL INDICATOR

THE PASS/FAIL INDICATOR

Use the PASS/FAIL indicator located directly above the ingress scan

to quickly determine whether the ingress scan has passed the limit

check. If the scan failed, you can identify the reason(s) for the failure

by looking at the ingress scan and moving the marker to identify the

frequencies at which it failed.

MEASUREMENT HOLDMEASUREMENT HOLD

MEASUREMENT HOLD

You can freeze the ingress scan measurement at any time by pressing

the SHIFT + keys. The measurement is retained even if the cable

is disconnected from the input port. Notice that the mode icon in the

upper left-hand portion of the screen flashes when the measurement is

on hold. Press the SHIFT + keys again to release the hold. The

measurement is not retained when another mode is selected or the

CLI-1450 is shut off.

PRINTING THE SCREENPRINTING THE SCREEN

PRINTING THE SCREEN

You can print the entire screen at any time by pressing the SHIFT +

keys. A bar graph appears indicating the status of the printout.

STORING A INGRESS SCAN FILESTORING A INGRESS SCAN FILE

STORING A INGRESS SCAN FILE

Press the SHIFT + keys to store the current ingress scan measure-

ment into a file. A screen will appear asking you to enter a name for

the file. Once stored, you will be able to recall the file at a later time

and view it on the ingress scan screen. You will be able to adjust the

screen settings the same as when you are viewing a “live” measure-

ment. See the section on VIEW mode to find out how to access files

that you have stored. You will also be able to print (later) and upload

to StealthWare 3.0 to keep on record, or for further analysis (compari-

son with other traces).

1 2 ... 75 76 77 78 79 80 81 82 83 84 85 ... 100 101

Brak uwag

Wavetek MS1300 Dokumentacja Strona 80