Wavetek MS1300 Dokumentacja Pobierz pdf (Strona 50)

Tip

If you are not interested in logging the information, select

NONE from the list. Your MicroStealth will present you

with only the steps required to configure the test.

Tip

You can rename the location highlighted in the directory by

pressing the SHIFT + keys. A screen will appear asking

you to enter a new name.

New/Edit Location

This screen is where you enter the information for a new or

existing location. Use the up and down arrows to select the

item to be edited. The items that appear in the list depend

on the type of location you have selected. If you regularly

perform tests at this location, you can save it for future use

so that you only need to enter the information once. To do

this, press the soft key and enter a name for the

location. When you are done editing, press to continue

configuring the Auto Test.

Note

Your MicroStealth will remind you when you have not

stored the location. You should only do this, however, if

you think you will return for another test.

Choose Probe Point

Some location types have multiple points at which you can

make test measurements. If you have selected such a type,

this screen will appear. Use the up and down arrows to

choose the appropriate probe point from the list and then

press the soft key.

Measure Voltage

You can log voltage measurements that you make using

your multimeter. These will appear when viewing or

printing the results of the Auto Test. When you have

finished entering the measurements, press the soft key.

1 2 ... 45 46 47 48 49 50 51 52 53 54 55 ... 70 71

Brak uwag

Wavetek MS1300 Dokumentacja Strona 50