Wavetek 39A Dokumentacja Pobierz pdf (Strona 102)

User Manual 301/302

VOLTage?

Response

The 302 will return the present amplitude value. The returned value will be in standard scientific format (for

example: 100mV would be returned as 100E-3 – positive numbers are unsigned).

VOLTage:OFFSet <offs>

Purpose

This command programs the amplitude offset of the output waveform. The offset is calibrated when the

source impedance is 50Ω.

• <offs> numeric value that sets the amplitude offset

VOLTage:OFFSet ?

Response

The 302 will return the present offset value. The returned value will be in standard scientific format (for

example: 100mV would be returned as 100E-3 – positive numbers are unsigned).

SINusoid:PHASe <phase>

Purpose

This command programs start phase of the standard sine waveform. This command has no affect on

arbitrary waveforms.

• <phase> numeric value that sets the start phase

SINusoid:PHASe?

Response

The 302 will return the present start phase value.

TRIangle:PHASe <phase>

Purpose

This command programs start phase of the standard triangular waveform. This command has no affect on

arbitrary waveforms.

• <phase> numeric value that sets the start phase

TRIangle:PHASe?

Response

The 302 will return the present start phase value.

SQUare:DCYCle <duty_cycle>

Purpose

This command programs duty cycle of the standard square waveform. This command has no affect on

arbitrary waveforms.

• <duty_cycle> numeric value that sets the duty cycle value

SCPI Command Reference

1 2 ... 97 98 99 100 101 102 103 104 105 106 107 ... 136 137

Brak uwag

Wavetek 39A Dokumentacja Strona 102