Wavetek 147 Dokumentacja Pobierz pdf (Strona 138)

100

101

Measuring System Performance: Measuring Signal Levels

114

The Tilt adjustment uses amplifier gain to compensate for the attenuation of

signals moving through the cable. Higher frequencies are attenuated more

than lower frequencies. This accounts for the slope of the line in Fig. 6-3. Tilt

mode simplifies the actual balancing by displaying a bar graph with a

representation of up to nine video carrier levels. Tilt adjustment

compensates for unequal attenuation, so that each channel reaches a

customer with about the same level.

The following information is displayed in Tilt measurement mode (numbers

correspond to callouts in Fig. 6-3):

1. Reference scale

2. High and low carrier frequencies

3. High and low carrier levels

4. Tilt measurement

5. Reference level

6. Test point compensation (appears only if a non-zero value is

programmed during setup).

Fig. 6-3 The TILT Measurement Mode Screen

Balancing Amplifiers

A cable system is designed for unity gain, and the output level of each type

of amplifier (trunk, bridger/line extender) should be set or adjusted to be as

close to the same output as possible. The amplifiers are set up with

1 2 ... 133 134 135 136 137 138 139 140 141 142 143 ... 409 410

Komentarze do niniejszej Instrukcji

Brak uwag

Wavetek 147 Dokumentacja Strona 138

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Wavetek 147