Wavetek 147 Dokumentacja Pobierz pdf (Strona 203)

100

101

Chapter 10

Automatic Test

Automated tests are easy and provide a convenient way of acquiring proof-

of-performance compliance data. Tests can be executed immediately or

scheduled over a time period (to conserve battery life, the unit shuts itself off

between scheduled intervals). When you’re configuring an Auto Test, you

can record information about the location at which the test is being

performed. Files can be created for commonly tested locations so you need

enter the information only once.

Auto Test mode’s results are time, date, and temperature stamped and can

be viewed on the LCD screen. Limits are applied to the measurement data

with out-of-tolerance conditions concisely indicated. You can print a test

report for each interval or a comprehensive 24-hour report that summarizes

data collected from up to four intervals. Auto Test result files can be

uploaded to StealthWare.

Auto Test performs video and audio carrier level measurements for each

enabled channel. Optionally, you can select C/N, hum, or mod tests for each

channel. The unit will run these tests in accordance with the setup you

specify during configuration.

The basic procedure for initiating an Auto Test is as follows:

1. Record information about the test location (optional).

2. Log voltage measurements (optional).

INTRODUCTION

1 2 ... 198 199 200 201 202 203 204 205 206 207 208 ... 409 410

Komentarze do niniejszej Instrukcji

Brak uwag

Wavetek 147 Dokumentacja Strona 203

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Pomiary, testowanie i kontrola Wavetek 147